Allied Telesis AT-x210-9GT - Show Running-Config Atmf

C613-50105-01 REV C Command Reference for x210 Series 1254
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
RUNNING-CONFIG ATMF
show running-config atmf
Overview This command displays the running system information that is specific to AMF.
Syntax
show running-config atmf
Mode User Exec and Global Configuration
Example To display the current configuration of AMF, use the following commands:
node_1# show running-config atmf
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Related
Commands
show running-config
no debug all