Allied Telesis AT-x210-9GT - Chapter 36 Dynamic Host Configuration Protocol (DHCP) Commands; Introduction

36
C613-50105-01 REV C Command Reference for x210 Series 1269
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Dynamic Host
Configuration
Protocol (DHCP)
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the DHCP Feature Overview and Configuration Guide,
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide. This guide is
available at the above link on alliedtelesis.com.
Command List •“bootfile” on page 1271
•“clear ip dhcp binding” on page 1272
•“default-router” on page 1273
•“dns-server” on page 1274
•“domain-name” on page 1275
•“host (DHCP)” on page 1276
•“ip address dhcp” on page 1277
•“ip dhcp bootp ignore” on page 1279
•“ip dhcp option” on page 1280
•“ip dhcp pool” on page 1282
•“show counter dhcp-client” on page 1283
•“show counter dhcp-server” on page 1284
•“show dhcp lease” on page 1286
•“show ip dhcp binding” on page 1288
•“show ip dhcp pool” on page 1289
•“show ip dhcp server statistics” on page 1292