Allied Telesis AT-x210-9GT - Clear Ipv6 Dhcp Client

C613-50105-01 REV C Command Reference for x210 Series 1298
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP FOR IPV6 (DHCPV6) COMMANDS
CLEAR
IPV6 DHCP CLIENT
clear ipv6 dhcp client
Overview Use this command in Privileged Exec mode to restart a DHCPv6 client on an
interface.
Syntax
clear ipv6 dhcp client <interface>
Mode Privileged Exec
Example To restart a DHCPv6 client on interface vlan1, use the following command:
awplus# clear ipv6 dhcp client vlan1
Parameter Description
<interface> Specify the interface name to restart a DHCPv6 client on.