Allied Telesis AT-x210-9GT - Page 1318

C613-50105-01 REV C Command Reference for x210 Series 1318
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
NTP COMMANDS
NTP
SOURCE
To configure the NTP source interface with the IPv6 address 2001:0db8:010e::2,
enter the commands:
awplus# configure terminal
awplus(config)# ntp source 2001:0db8:010e::2
To remove a configured address for the NTP source interface, use the following
commands:
awplus# configure terminal
awplus(config)# no ntp source
Related
Commands
ntp peer
ntp server