C613-50105-01 REV C Command Reference for x210 Series 1341
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SNMP COMMANDS
SHOW
SNMP-SERVER VIEW
show snmp-server view
Overview This command displays the SNMP server views and is used with SNMP version 3
only.
Syntax
show snmp-server view
Mode Privileged Exec
Example To display the SNMP server views configured on the device, use the command:
awplus# show snmp-server view
Output Figure 39-8: Example output from the show snmp-server view command
Related
Commands
show snmp-server
snmp-server view
SNMP view information:
View Name ............... view1
OID .................... 1
Type ................... included
To Next Page
Loading...
