C613-50105-01 REV C Command Reference for x210 Series 1426
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LLDP COMMANDS
SHOW
LOCATION
The coordinate location information displayed may differ from the information
entered because it is stored in binary format. For more information, see the
location coord-location configuration command.
To display all ELIN location information configured on the switch, use the
command:
awplus# show location elin-location
Related
Commands
location elin-location-id
location civic-location identifier
location civic-location configuration
location coord-location identifier
location coord-location configuration
location elin-location
Table 48: Example output from the show location command
awplus# show location coord-location identifier 1
ID Element Type Element Value
--------------------------------------------------------------------
1 Latitude Resolution 15 bits
Latitude 38.8986481130123138427734375 degrees
Longitude Resolution 15 bits
Longitude 130.2323232293128967285156250 degrees
Altitude Resolution 10 bits
Altitude 2.50000000 meters
Map Datum WGS 84
Table 49: Example output from the show location elin-location command
awplus# show location elin-location
ID ELIN
-----------------------------------
1 1234567890
2 5432154321
To Next Page
Loading...
