Allied Telesis AT-x210-9GT - Chapter 42: RMON Commands; Introduction; RMON Commands

42
C613-50105-01 REV C Command Reference for x210 Series 1436
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RMON Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Remote Monitoring (RMON).
For an introduction to RMON and an RMON configuration example, see the RMON
Feature Overview and Configuration Guide.
RMON is disabled by default in AlliedWare Plus™. No RMON alarms or events are
configured.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“rmon alarm” on page 1437
•“rmon collection history” on page 1439
•“rmon collection stats” on page 1440
•“rmon event” on page 1441
•“show rmon alarm” on page 1442
•“show rmon event” on page 1443
•“show rmon history” on page 1445
•“show rmon statistics” on page 1447