Allied Telesis AT-x210-9GT - Show Rmon Event

C613-50105-01 REV C Command Reference for x210 Series 1443
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RMON COMMANDS
SHOW
RMON EVENT
show rmon event
Overview Use this command to display the events configured for the RMON probe.
NOTE: Only the events for switch port interfaces, not for VLAN interfaces, can be shown.
Syntax
show rmon event
Mode User Exec and Privileged Exec
Output Figure 42-1: Example output from the show rmon event command
NOTE: The following etherStats counters are not currently available for Layer 3
interfaces:
• etherStatsBroadcastPkts
• etherStatsCRCAlignErrors
• etherStatsUndersizePkts
•etherStatsOversizePkts
• etherStatsFragments
• etherStatsJabbers
• etherStatsCollisions
• etherStatsPkts64Octets
• etherStatsPkts65to127Octets
• etherStatsPkts128to255Octets
• etherStatsPkts256to511Octets
• etherStatsPkts512to1023Octets
• etherStatsPkts1024to1518Octets
awplus#sh rmon event
event Index = 787
Description TRAP
Event type log & trap
Event community name gopher
Last Time Sent = 0
Owner RMON_SNMP

event Index = 990
Description TRAP
Event type trap
Event community name teabo
Last Time Sent = 0
Owner RMON_SNMP