Allied Telesis AT-x210-9GT - Show Ssh Client

C613-50105-01 REV C Command Reference for x210 Series 1474
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SECURE SHELL (SSH) COMMANDS
SHOW
SSH CLIENT
show ssh client
Overview This command displays the current configuration of the Secure Shell client.
Syntax
show ssh client
Mode User Exec, Privileged Exec and Global Configuration
Example To display the current configuration for SSH clients on the login shell, use the
command:
awplus# show ssh client
Output Figure 43-7: Example output from the show ssh client command
Related
Commands
show ssh server
Secure Shell Client Configuration
----------------------------------------------------------------
Port : 22
Version : 2,1
Connect Timeout : 30 seconds
Session Timeout : 0 (off)
Debug : NONE
Table 7: Parameters in the output of the show ssh client command
Parameter Description
Port SSH server TCP port where the SSH client connects to. The default
is port 22.
Version SSH server version; either “1”, “2” or “2,1”.
Connect
Timeout
Time in seconds that the SSH client waits for an SSH session to
establish. If the value is 0, the connection is terminated when it
reaches the TCP timeout.
Debug Whether debugging is active on the client.