Allied Telesis AT-x210-9GT - Chapter 46: Sflow Commands; Introduction; Sflow Commands

46
C613-50105-01 REV C Command Reference for x210 Series 1556
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
sFlow Commands
Introduction
Overview This chapter provides an alphabetical reference for sFlow commands.
Command List •“debug sflow” on page 1557
•“debug sflow agent” on page 1558
•“sflow agent (address)” on page 1559
•“sflow collector (address)” on page 1561
•“sflow collector max-datagram-size” on page 1563
•“sflow enable” on page 1564
•“sflow max-header-size” on page 1565
•“sflow polling-interval” on page 1567
•“sflow sampling-rate” on page 1568
•“show debugging sflow” on page 1569
•“show running-config sflow” on page 1571
•“show sflow” on page 1572
•“show sflow interface” on page 1574
•“undebug sflow” on page 1575