C613-50105-01 REV C Command Reference for x210 Series 212
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
SYSTEM SERIALNUMBER
show system serialnumber
Overview This command shows the serial number information for the device.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show system serialnumber
Mode User Exec and Privileged Exec
Example To display the serial number information for the device, use the command:
awplus# show system serialnumber
Output Figure 6-20: Example output from the show system serial number command
awplus#show system serialnumber
45AX5300X
To Next Page
Loading...
