Allied Telesis AT-x210-9GT - Clear Test Cable-Diagnostics Tdr

C613-50105-01 REV C Command Reference for x210 Series 221
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PLUGGABLES AND CABLING COMMANDS
CLEAR
TEST CABLE-DIAGNOSTICS TDR
clear test cable-diagnostics tdr
Overview Use this command to clear the results of the last cable test that was run.
Syntax
clear test cable-diagnostics tdr
Mode Privileged Exec
Examples To clear the results of a previous cable-diagnostics test use the following
commands:
awplus# clear test cable-diagnostics tdr
Related
Commands
show test cable-diagnostics tdr
test cable-diagnostics tdr interface