Allied Telesis AT-x210-9GT - Chapter 8: Logging Commands; Introduction; Logging Commands

8
C613-50105-01 REV C Command Reference for x210 Series 243
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Logging Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
logging.
Command List •“clear exception log” on page 245
•“clear log” on page 246
•“clear log buffered” on page 247
•“clear log permanent” on page 248
•“default log buffered” on page 249
•“default log console” on page 250
•“default log email” on page 251
•“default log host” on page 252
•“default log monitor” on page 253
•“default log permanent” on page 254
•“log buffered” on page 255
•“log buffered (filter)” on page 256
•“log buffered exclude” on page 259
•“log buffered size” on page 262
•“log console” on page 263
•“log console (filter)” on page 264
•“log console exclude” on page 267
•“log email” on page 270
•“log email (filter)” on page 271
•“log email exclude” on page 274