C613-50105-01 REV C Command Reference for x210 Series 251
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
DEFAULT
LOG EMAIL
default log email
Overview This command restores the default settings for log messages sent to an email
address. By default no filters are defined for email addresses. Filters must be
defined before messages will be sent. This command also restores the remote
syslog server time offset value to local (no offset).
Syntax
default log email <email-address>
Mode Global Configuration
Example To restore the default settings for log messages sent to the email address
admin@alliedtelesis.com use the following commands:
awplus# configure terminal
awplus(config)# default log email admin@alliedtelesis.com
Related
Commands
log email
log email (filter)
log email exclude
log email time
show log config
Parameter Description
<email-address> The email address to send log messages to
To Next Page
Loading...
