C613-50105-01 REV C Command Reference for x210 Series 379
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
PLATFORM
STOP-UNREG-MC-FLOODING
Examples To enable this feature and stop multicast packet flooding, use the following
commands:
awplus# configure terminal
awplus(config)# platform stop-unreg-mc-flooding
To disable this feature and allow multicast packet flooding, use the following
commands:
awplus# configure terminal
awplus(config)# no platform stop-unreg-mc-flooding
Related
Commands
show platform
show running-config
To Next Page
Loading...
