Allied Telesis AT-x210-9GT - Page 401

C613-50105-01 REV C Command Reference for x210 Series 401
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
SPEED
To return the port to auto-negotiating its speed, enter the following commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# speed auto
To set the port to auto-negotiate its speed at 100Mbps and 1000Mbps, enter the
following commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# speed auto 100 1000
To set the port to auto-negotiate its speed at 1000Mbps only, enter the following
commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# speed auto 1000
Related
Commands
duplex
polarity
show interface
speed (asyn)