C613-50105-01 REV C Command Reference for x210 Series 415
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
PORT
-VLAN-FORWARDING-PRIORITY
override each other to set a port to the forwarding or blocking states, use the
commands:
awplus# configure terminal
awplus(config)# port-vlan-forwarding-priority none
To restore the default highest priority protocol back to the default of EPSR, use the
commands:
awplus# configure terminal
awplus(config)# no port-vlan-forwarding-priority
Related
Commands
show port-vlan-forwarding-priority
To Next Page
Loading...
