Allied Telesis AT-x210-9GT - Show Vlan Classifier Interface Group

C613-50105-01 REV C Command Reference for x210 Series 422
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
SHOW
VLAN CLASSIFIER INTERFACE GROUP
show vlan classifier interface group
Overview Use this command to display information about all interfaces configured for a
VLAN group or all the groups.
Syntax
show vlan classifier interface group [<1-16>]
Mode User Exec and Privileged Exec
Usage If a group ID is not specified, all interfaces configured for all VLAN classifier groups
are shown. If a group ID is specified, the interfaces configured for this VLAN
classifier group are shown.
Example To display information about all interfaces configured for all VLAN groups, enter
the command:
awplus# show vlan classifier interface group
To display information about all interfaces configured for VLAN group 1, enter the
command:
awplus# show vlan classifier interface group 1
Output Figure 14-4: Example output from the show vlan classifier interface group
command
Output Figure 14-5: Example output from the show vlan classifier interface group 1
command
Related
Commands
vlan classifier group
show vlan classifier group interface
Parameter Description
<1-16> VLAN classifier interface group identifier
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2
vlan classifier group 2 interface port1.0.3
vlan classifier group 2 interface port1.0.4
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2