Allied Telesis AT-x210-9GT - Vlan Database

C613-50105-01 REV C Command Reference for x210 Series 451
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN COMMANDS
VLAN
DATABASE
vlan database
Overview Use this command to enter the VLAN Configuration mode.
Syntax
vlan database
Mode Global Configuration
Usage Use this command to enter the VLAN configuration mode. You can then add or
delete a VLAN, or modify its values.
Example In the following example, note the change to VLAN configuration mode from
Configure mode:
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)#
Related
Commands
vlan