C613-50105-01 REV C Command Reference for x210 Series 547
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LINK AGGREGATION COMMANDS
SHOW
LACP-COUNTER
show lacp-counter
Overview Use this command to display the packet traffic on all ports of all present LACP
aggregators, or a given LACP aggregator.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide, which is
available on our website at alliedtelesis.com.
Syntax
show lacp-counter [<1-8>]
Mode User Exec and Privileged Exec
Example
awplus# show lacp-counter 2
Output Example output from show lacp-counter
Parameter Description
<1-8> Channel-group number.
% Traffic statistics
Port LACPDUs Marker Pckt err
Sent Recv Sent Recv Sent Recv
% Aggregator po2 (IfIndex: 4604)
port1.0.2 0 0 0 0 0 0
To Next Page
Loading...
