Allied Telesis AT-x210-9GT - Chapter 17: IP Addressing and Protocol Commands; Introduction; IP Addressing and Protocol Commands

17
C613-50105-01 REV C Command Reference for x210 Series 554
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IP Addressing and
Protocol Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
various IP features, including the following protocols:
• Address Resolution Protocol (ARP)
For more information, see the IP Feature Overview and Configuration Guide.
Command List •“arp-aging-timeout” on page 555
•“arp (IP address MAC)” on page 556
•“arp log” on page 557
•“arp-reply-bc-dmac” on page 560
•“clear arp-cache” on page 561
•“debug ip packet interface” on page 562
•“ip address (IP Addressing and Protocol)” on page 564
•“ip gratuitous-arp-link” on page 566
•“ip unreachables” on page 568
•“ping” on page 570
•“show arp” on page 571
•“show debugging ip packet” on page 573
•“show ip interface” on page 575
•“show ip sockets” on page 576
•“tcpdump” on page 579
•“traceroute” on page 580
•“undebug ip packet interface” on page 581