Allied Telesis AT-x210-9GT - Chapter 1 CLI Navigation Commands; Introduction

1
C613-50105-01 REV C Command Reference for x210 Series 56
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
CLI Navigation
Commands
Introduction
Overview This chapter provides an alphabetical reference for the commands used to
navigate between different modes. This chapter also provides a reference for the
help and show commands used to help navigate within the CLI.
Command List •“configure terminal” on page 57
•“disable (Privileged Exec mode)” on page 58
•“do” on page 59
•“enable (Privileged Exec mode)” on page 60
•“end” on page 62
•“exit” on page 63
•“help” on page 64
•“logout” on page 65
•“show history” on page 66