Allied Telesis AT-x210-9GT - Disable (Privileged Exec Mode)

C613-50105-01 REV C Command Reference for x210 Series 58
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
CLI NAVIGATION COMMANDS
DISABLE
(PRIVILEGED EXEC MODE)
disable (Privileged Exec mode)
Overview This command exits the Privileged Exec mode, returning the prompt to the User
Exec mode. To end a session, use the exit command.
Syntax
disable
Mode Privileged Exec
Example To exit the Privileged Exec mode, enter the command:
awplus# disable
awplus>
Related
Commands
enable (Privileged Exec mode)
end
exit