C613-50105-01 REV C Command Reference for x210 Series 580
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IP ADDRESSING AND PROTOCOL COMMANDS
TRACEROUTE
traceroute
Overview Use this command to trace the route to the specified IPv4 host.
Syntax
traceroute {<ip-addr>|<hostname>}
Mode User Exec and Privileged Exec
Example
awplus# traceroute 10.10.0.5
Parameter Description
<ip-addr> The destination IPv4 address. The IPv4 address uses the
format A.B.C.D.
<hostname> The destination hostname.
To Next Page
Loading...
