Allied Telesis AT-x210-9GT - Ipv6 Neighbor

C613-50105-01 REV C Command Reference for x210 Series 588
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV6 COMMANDS
IPV
6 NEIGHBOR
ipv6 neighbor
Overview Use this command to add a static IPv6 neighbor entry.
Use the no variant of this command to remove a specific IPv6 neighbor entry.
Syntax
ipv6 neighbor <ipv6-address> <vlan-name> <mac-address>
<port-list>
no ipv6 neighbor <ipv6-address> <vlan-name> <port-list>
Mode Global Configuration
Usage Use this command to clear a specific IPv6 neighbor entry. To clear all dynamic
address entries, use the clear ipv6 neighbors command.
Example To create a static neighbor entry for IPv6 address 2001:0db8::a2, on vlan 4, MAC
address 0000.cd28.0880, on port1.0.6, use the command:
awplus# configure terminal
awplus(config)# ipv6 neighbor 2001:0db8::a2 vlan4
0000.cd28.0880 port1.0.6
Related
Commands
clear ipv6 neighbors
Parameter Description
<ipv6-address> Specify the neighbor’s IPv6 address in the format X:X::X:X.
<vlan-name> Specify the neighbor’s VLAN name.
<mac-address> Specify the MAC hardware address in hexadecimal notation in
the format HHHH.HHHH.HHHH.
<port-list> Specify the port number, or port range.