Allied Telesis AT-x210-9GT - Show Ip Route Summary

C613-50105-01 REV C Command Reference for x210 Series 602
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
STATIC ROUTING COMMANDS FOR MANAGEMENT PURPOSES
SHOW
IP ROUTE SUMMARY
show ip route summary
Overview This command displays a summary of the current RIB (Routing Information Base)
entries.
To modify the lines displayed, use the | (output modifier token); to save the output
to a file, use the > output redirection token.
Syntax
show ip route summary
Mode User Exec and Privileged Exec
Example To display a summary of the current RIB entries, use the command:
awplus# show ip route summary
Output Figure 19-3: Example output from the show ip route summary command
Related
Commands
show ip route
show ip route database
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Route Source Networks
connected 5
Total 8