Allied Telesis AT-x210-9GT - Ip Igmp Version

C613-50105-01 REV C Command Reference for x210 Series 643
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IGMP AND IGMP SNOOPING COMMANDS
IP
IGMP VERSION
ip igmp version
Overview Use this command to set the current IGMP version (IGMP version 1, 2 or 3) on an
interface.
Use the no variant of this command to return to the default version.
Syntax
ip igmp version <1-3>
no ip igmp version
Default The default IGMP version is 3.
Mode Interface Configuration for a VLAN interface.
Example To set the IGMP version to 2 for vlan2, use the commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# ip igmp version 2
Related
Commands
show ip igmp interface
Parameter Description
version <1-3> IGMP protocol version number