Allied Telesis AT-x210-9GT - Debug Mld

C613-50105-01 REV C Command Reference for x210 Series 658
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
MLD SNOOPING COMMANDS
DEBUG
MLD
debug mld
Overview Use this command to enable all MLD debugging modes, or a specific MLD
debugging mode.
Use the no variant of this command to disable all MLD debugging modes, or a
specific MLD debugging mode.
Syntax
debug mld {all|decode|encode|events|fsm|tib}
no debug mld {all|decode|encode|events|fsm|tib}
Mode Privileged Exec and Global Configuration
Examples
awplus# configure terminal
awplus(config)# debug mld all
awplus# configure terminal
awplus(config)# debug mld decode
awplus# configure terminal
awplus(config)# debug mld encode
awplus# configure terminal
awplus(config)# debug mld events
Related
Commands
show debugging mld
Parameter Description
all Debug all MLD.
decode Debug MLD decoding.
encode Debug MLD encoding.
events Debug MLD events.
fsm Debug MLD Finite State Machine (FSM).
tib Debug MLD Tree Information Base (TIB).