Allied Telesis AT-x210-9GT - Show Ip Access-List

C613-50105-01 REV C Command Reference for x210 Series 728
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
IP ACCESS-LIST
show ip access-list
Overview Use this command to display IP access-lists.
Syntax
show ip access-list [<1-99>|<1300-1999>|<access-list-name>]
Mode User Exec and Privileged Exec
Example
awplus# show ip access-list
Output Figure 23-1: Example output from the show ip access-list command
Parameter Description
<1-99> IP standard access-list.
<1300-1999> IP standard access-list (expanded range).
<access-list-name> IP named access-list.
Standard IP access-list 1
permit 172.168.6.0, wildcard bits 0.0.0.255
permit 192.168.6.0, wildcard bits 0.0.0.255