C613-50105-01 REV C Command Reference for x210 Series 735
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV6 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
(IPV6 ACCESS-LIST STANDARD FILTER)
To remove the ACL filter entry that will deny any IPv6 packets from the standard
IPv6 access-list named my-list, enter the commands:
awplus# configure terminal
awplus(config)# ipv6 access-list standard my-list
awplus(config-ipv6-std-acl)# no deny any
Alternately, to remove the ACL filter entry with sequence number 5 to the
standard IPv6 access-list named my-list, enter the commands:
awplus# configure terminal
awplus(config)# ipv6 access-list standard my-list
awplus(config-ipv6-std-acl)# no 5
Related
Commands
ipv6 access-list standard (named)
show ipv6 access-list (IPv6 Software ACLs)
show running-config
To Next Page
Loading...
