Allied Telesis AT-x210-9GT - Show Ipv6 Access-List (Ipv6 Software Acls)

C613-50105-01 REV C Command Reference for x210 Series 736
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV6 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
IPV6 ACCESS-LIST (IPV6 SOFTWARE ACLS)
show ipv6 access-list (IPv6 Software ACLs)
Overview Use this command to display all configured IPv6 access-lists or the IPv6 access-list
specified by name.
Syntax
show ipv6 access-list [<access-list-name>]
show ipv6 access-list standard [<access-list-name>]
Mode User Exec and Privileged Exec
Example To show all configured IPv6 access-lists, use the following command:
awplus# show ipv6 access-list
Output Figure 24-1: Example output from show ipv6 access-list
Example To show the IPv6 access-list named deny_icmp, use the following command:
awplus# show ipv6 access-list deny_icmp
Output Figure 24-2: Example output from show ipv6 access-list for a named ACL
Related
Commands
ipv6 access-list standard (named)
(ipv6 access-list standard filter)
Parameter Description
<access-list-name> Only display information about an IPv6 access-list with
the specified name.
standard Only display information about standard access-lists.

IPv6 access-list deny_icmp
deny icmp any any vlan 1

IPv6 access-list deny_ssh
deny tcp abcd::0/64 any eq 22

IPv6 access-list deny_icmp
deny icmp any any vlan 1