Allied Telesis AT-x210-9GT - Clear Mls Qos Interface Policer-Counters

C613-50105-01 REV C Command Reference for x210 Series 742
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
CLEAR
MLS QOS INTERFACE POLICER-COUNTERS
clear mls qos interface policer-counters
Overview Resets an interface’s policer counters to zero. You can either clear a specific
class-map, or you can clear all class-maps by not specifying a class map.
Syntax
clear mls qos interface <port> policer-counters [class-map
<class-map>]
Mode Privileged Exec
Example To reset the policy counters to zero for all class-maps for port1.0.1, use the
command:
awplus# clear mls qos interface port1.0.1 policer-counters
Related
Commands
show mls qos interface policer-counters
Parameter Description
<port> The port may be a switch port (e.g. port1.0.4), a static
channel group (e.g. sa3), or a dynamic (LACP) channel group
(e.g. po4).
class-map Select a class-map.
<class-map> Class-map name.