Allied Telesis AT-x210-9GT - Show Class-Map

C613-50105-01 REV C Command Reference for x210 Series 773
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
SHOW
CLASS-MAP
show class-map
Overview Use this command to display the QoS class-maps’ criteria for classifying traffic.
Syntax
show class-map [<class-map-name>]
Mode User Exec and Privileged Exec
Example To display a QoS class-map’s match criteria for classifying traffic, use the command:
awplus# show class-map cmap1
Output Figure 25-1: Example output from the show class-map command
Related
Commands
class-map
Parameter Description
<class-map-name> Name of the class-map.
CLASS-MAP-NAME: cmap1
Set IP DSCP: 56
Match IP DSCP: 7