Allied Telesis AT-x210-9GT - Show Policy-Map

C613-50105-01 REV C Command Reference for x210 Series 784
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
SHOW
POLICY-MAP
show policy-map
Overview Displays the policy-maps configured on the switch. The output also shows
whether or not they are connected to a port (attached / detached) and shows their
associated class-maps.
Syntax
show policy-map [<name>]
Mode User Exec and Privileged Exec
Example To display a listing of the policy-maps configured on the switch, use the command:
awplus# show policy-map
Output Figure 25-9: Example output from the show policy-map command
Related
Commands
service-policy input
Parameter Description
<name> The name of a specific policy-map.
POLICY-MAP-NAME: general-traffic
State: attached
Default class-map action: permit
CLASS-MAP-NAME: default
CLASS-MAP-NAME: database-traffic