Allied Telesis AT-x210-9GT - Page 820

C613-50105-01 REV C Command Reference for x210 Series 820
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
802.1X COMMANDS
SHOW
DOT1X INTERFACE
See the sample output below showing 802.1X authentication
sessionstatistics for port1.0.6:
awplus# show dot1x interface port1.0.6 sessionstatistics
See sample output below showing 802.1X authentication diagnostics for
port1.0.6:
awplus# show dot1x interface port1.0.6 diagnostics
Table 2: Example output from the show dot1x interface command for a port
awplus#show dot1x interface port1.0.6Authentication info for
interface port1.0.6
portEnabled: true - portControl: Auto
portStatus: Authorized
reAuthenticate: disabled
reAuthPeriod: 3600
PAE: quietPeriod: 60 - maxReauthReq: 2 - txPeriod: 30
PAE: connectTimeout: 30 
BE: suppTimeout: 30 - serverTimeout: 30
CD: adminControlledDirections: in
KT: keyTxEnabled: false
critical: disabled
guestVlan: disabled
dynamicVlanCreation: single-dynamic-vlan
assignFailActionRule: deny
hostMode: multi-supplicant
maxSupplicant:1024
dot1x: enabled
protocolVersion: 1
authMac: enabled
method: PAP
reauthRelearning: disabled
authWeb: enabled
method: PAP
lockCount: 3
packetForwarding: disabled
twoStepAuthentication:
configured: enabled
actual: enabled
supplicantMac: none
awplus#show dot1x interface port1.0.6 
sessionstatistics
Authentication session statistics for interface 
port1.0.6
session user name: manager
session authentication method: Remote server
session time: 19440 secs
session terminat cause: Not terminated yet