C613-50105-01 REV C Command Reference for x210 Series 827
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
802.1X COMMANDS
SHOW
DOT1X SUPPLICANT
See sample output below showing the supplicant on the switch using the brief
parameter:
awplus# show dot1x supplicant brief
For example, if two-step authentication is configured with 802.1X authentication
as the first method and web authentication as the second method then the output
is as follows:
Related
Commands
show dot1x supplicant interface
Interface port1.0.6
authenticationMethod: dot1x
totalSupplicantNum: 1
authorizedSupplicantNum: 1
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 1
webBasedAuthenticationSupplicantNum: 0
Interface VID Mode MAC Address Status IP Address Username
========= === ==== =========== ====== ========== ========
port1.0.6
2 D 00d0.59ab.7037 Authenticated 192.168.2.201 manager
Interface port1.0.6 authenticationMethod: dot1x/web
Two-Step Authentication
firstMethod: dot1x
secondMethod: web
totalSupplicantNum: 1
authorizedSupplicantNum: 1
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 0
webBasedAuthenticationSupplicantNum: 1
otherAuthenticationSupplicantNum: 0
Interface VID Mode MAC Address Status IP Address Username
=========== ==== ==== ============== ================= =============== ========
port1.0.6
5 W 0008.0d5e.c216 Authenticated 192.168.1.200 web
To Next Page
Loading...
