Allied Telesis AT-x210-9GT - Chapter 27: Authentication Commands; Introduction; Authentication Commands

27
C613-50105-01 REV C Command Reference for x210 Series 832
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Authentication
Commands
Introduction
Overview This chapter provides an alphabetical reference for authentication commands. For
more information, see the AAA and Port Authentication Feature Overview and
Configuration Guide.
Command List •“auth auth-fail vlan” on page 835
•“auth critical” on page 837
•“auth dynamic-vlan-creation” on page 838
•“auth guest-vlan” on page 841
•“auth guest-vlan forward” on page 844
•“auth host-mode” on page 846
•“auth log” on page 848
•“auth max-supplicant” on page 850
•“auth profile (Global Configuration)” on page 852
•“auth profile (Interface Configuration)” on page 853
•“auth reauthentication” on page 854
•“auth roaming disconnected” on page 855
•“auth roaming enable” on page 857
•“auth supplicant-ip” on page 859
•“auth supplicant-mac” on page 861
•“auth timeout connect-timeout” on page 864
•“auth timeout quiet-period” on page 866
•“auth timeout reauth-period” on page 867
•“auth timeout server-timeout” on page 869