C613-50105-01 REV C Command Reference for x210 Series 859
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AUTHENTICATION COMMANDS
AUTH
SUPPLICANT-IP
auth supplicant-ip
Overview This command adds a supplicant (client device) IP address on a given interface and
provides parameters for its configuration.
Use the no variant of this command to delete the supplicant IP address and reset
other parameters to their default values. The IP address can be determined before
authentication for only auth-web client.
Syntax
auth supplicant-ip <ip-addr> [max-reauth-req <1-10>]
[port-control {auto|force-authorized|force-unauthorized}]
[quiet-period <1-65535>] [reauth-period <1-4294967295>]
[supp-timeout <1-65535>] [server-timeout <1-65535>]
[reauthentication]
no auth supplicant-ip <ip-addr> [reauthentication]
Parameter Description
<ip-addr> IP address of the supplicant entry in A.B.C.D/P format.
max-reauth-req The number of reauthentication attempts before
becoming unauthorized.
<1-10> Count of reauthentication attempts (default 2).
port-control Port control commands.
auto A port control parameter that allows port clients to
negotiate authentication.
force-authorized A port control parameter that forces the port state to
authorized.
force-unauthorized A port control parameter that forces the port state to
unauthorized.
quiet-period Quiet period during which the port remains in the HELD
state (default 60 seconds).
<1-65535> Seconds for quiet period.
reauth-period Seconds between reauthorization attempts (default 3600
seconds).
<1-4294967295> Seconds for reauthorization attempts (reauth-period).
supp-timeout Supplicant response timeout.
<1-65535> Seconds for supplicant response timeout (default 30
seconds).
server-timeout The period, in seconds, before the authentication server
response times out.
<1-65535> The server-timeout period, in seconds, default 3600
seconds.
reauthentication Enable reauthentication on a port.
To Next Page
Loading...
