Allied Telesis AT-x210-9GT - Radius-Secure-Proxy Aaa

C613-50105-01 REV C Command Reference for x210 Series 974
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AAA COMMANDS
RADIUS
-SECURE-PROXY AAA
radius-secure-proxy aaa
Overview Use this command to enter the RadSecProxy AAA (authentication, authorization,
and accounting) application configuration mode. This application allows local
RADIUS-based clients on system to communicate with remote RadSec servers via
a secure (TLS) proxy.
Syntax
radius-secure-proxy aaa
Mode Global Configuration Mode
Example To change mode from User Exec mode to the RadSecProxy AAA configuration
mode, use the commands:
awplus# configure terminal
awplus(config)# radius-secure-proxy aaa
awplus(config-radsecproxy-aaa)#
Related
Commands
proxy-port
server (radsecproxy-aaa)
server name-check
server trustpoint