Allied Telesis AT-x210-9GT - Show Debugging Aaa

C613-50105-01 REV C Command Reference for x210 Series 981
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AAA COMMANDS
SHOW
DEBUGGING AAA
show debugging aaa
Overview This command displays the current debugging status for AAA (Authentication,
Authorization, Accounting).
Syntax
show debugging aaa
Mode User Exec and Privileged Exec
Example To display the current debugging status of AAA, use the command:
awplus# show debug aaa
Output Figure 28-2: Example output from the show debug aaa command
AAA debugging status:
Authentication debugging is on
Accounting debugging is off