C613-50105-01 REV C Command Reference for x210 Series 987
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RADIUS COMMANDS
DEBUG
RADIUS
debug radius
Overview This command enables RADIUS debugging. If no option is specified, all debugging
options are enabled.
Use the no variant of this command to disable RADIUS debugging. If no option is
specified, all debugging options are disabled.
Syntax
debug radius [packet|event|all]
no debug radius [packet|event|all]
Default RADIUS debugging is disabled by default.
Mode Privileged Exec
Examples To enable debugging for RADIUS packets, use the command:
awplus# debug radius packet
To enable debugging for RADIUS events, use the command:
awplus# debug radius event
To disable debugging for RADIUS packets, use the command:
awplus# no debug radius packet
To disable debugging for RADIUS events, use the command:
awplus# no debug radius event
Related
Commands
show debugging radius
undebug radius
Parameter Description
packet Debugging for RADIUS packets is enabled or disabled.
event Debugging for RADIUS events is enabled or disabled.
all Enable or disable all debugging options.
To Next Page
Loading...
