Allied Telesis AT-x230-28GP - Clear Lldp Statistics

C613-50104-01 REV A Command Reference for x230 Series 1646
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LLDP COMMANDS
CLEAR
LLDP STATISTICS
clear lldp statistics
Overview This command clears all LLDP statistics (packet and event counters) associated
with specified ports. If no port list is supplied, LLDP statistics for all ports are
cleared.
Syntax
clear lldp statistics [interface <port-list>]
Mode Privileged Exec
Examples To clear the LLDP statistics on ports 1.0.1 and 1.0.6, use the command:
awplus# clear lldp statistics interface port1.0.1,port1.0.6
To clear all LLDP statistics for all ports, use the command:
awplus# clear lldp statistics
Related
Commands
show lldp statistics
show lldp statistics interface
Parameter Description
<port-list> The ports for which the statistics are to be cleared.