Allied Telesis AT-x230-28GP - Show License

C613-50104-01 REV A Command Reference for x230 Series 168
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FEATURE LICENSING COMMANDS
SHOW
LICENSE
show license
Overview This command displays information about a specific software feature license, or all
enabled software feature licenses on the device.
Syntax
show license [feature] [<label>|index <index-number>]
Mode User Exec and Privileged Exec
Examples To display full information about all enabled licenses, use the command:
awplus# show license
To display full information about the licenses with index number 1, use the
command:
awplus# show license index 1
Parameter Description
feature Only display license information for any applied feature licenses.
<label> The license name to show information about. This can be used
instead of the index number to identify a specific license.
index
<index-number>
The index number of the license to show information about. This
can be used instead of the license name to identify a specific
license.
Table 4-1: Parameters in the output of show license
Parameter Description
Board region Name of the region for the Base License features.
Index Index identifying entry. The index is assigned
automatically by the software. It is not configured.
License name Name of the license key bundle (case-sensitive).
Customer name Customer name.
Quantity of licenses Quantity of licensed installations.
Type of license Full or Trial.
License issue date Date the license was generated.
License expiry date Expiry date for trial license.
Features included List of features included in the feature license.