C613-50104-01 REV A Command Reference for x230 Series 1805
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TRIGGER COMMANDS
TYPE
REBOOT
type reboot
Overview This command configures a trigger that activates when your device is rebooted.
Syntax
type reboot
Mode Trigger Configuration
Example To configure trigger 32 to activate when your device reboots, use the following
commands:
awplus# configure terminal
awplus(config)# trigger 32
awplus(config-trigger)# type reboot
Related
Commands
show trigger
trigger
To Next Page
Loading...
