C613-50104-01 REV A Command Reference for x230 Series 257
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PLUGGABLES AND CABLING COMMANDS
SHOW
TEST CABLE-DIAGNOSTICS TDR
show test cable-diagnostics tdr
Overview This command displays the results of the last cable-diagnostics test that was run
using the TDR (Time Domain Reflectometer) on a fixed copper cable port.
The displayed status of the cable can be either:
•OK
•Open
• Short (within-pair)
• Short (across-pair)
• Error
Syntax
show test cable-diagnostics tdr
Mode Privileged Exec
Examples To show the results of a cable-diagnostics test use the following command:
awplus# show test cable-diagnostics tdr
Output Figure 7-7: Example output from the show test cable-diagnostics tdr
command
Port Pair Length Status
-------------------------------------------------
1.0.1 A - OK
B - OK
C - OK
D - OK
To Next Page
Loading...
