Allied Telesis AT-x230-28GP - Match Vlan

C613-50104-01 REV A Command Reference for x230 Series 949
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
MATCH
VLAN
match vlan
Overview Use this command to define the VLAN ID as match criteria.
Use the no variant of this command to disable the VLAN ID used as match criteria.
Syntax
match vlan <1-4094>
no match vlan
Mode Class Map Configuration
Examples To configure a class-map named cmap1 to include traffic from VLAN 3, use the
commands:
awplus# configure terminal
awplus(config)# class-map cmap1
awplus(config-cmap)# match vlan 3
To disable the configured VLAN ID as a match criteria for the class-map named
cmap1, use the commands:
awplus# configure terminal
awplus(config)# class-map cmap1
awplus(config-cmap)# no match vlan
Parameter Description
<1-4094> The VLAN number.