Allied Telesis AT-x230-28GP - Policy-Map

C613-50104-01 REV A Command Reference for x230 Series 960
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
POLICY
-MAP
policy-map
Overview Use this command to create a policy-map and to enter Policy Map Configuration
mode to configure the specified policy-map.
Use the no variant of this command to delete an existing policy-map.
Syntax
policy-map <name>
no policy-map <name>
Mode Global Configuration
Example To create a policy-map called pmap1, use the commands:
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)#
Related
Commands
class-map
Parameter Description
<name> Name of the policy-map.