C613-50104-01 REV A Command Reference for x230 Series 99
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
EDIT
edit
Overview This command opens a text file in the AlliedWare Plus™ text editor. Once opened
you can use the editor to alter to the file.
If a filename is specified and it already exists, then the editor opens it in the text
editor.
If no filename is specified, the editor prompts you for one when you exit it.
Before starting the editor make sure your terminal, terminal emulation program, or
Telnet client is 100% compatible with a VT100 terminal. The editor uses VT100
control sequences to display text on the terminal.
For more information about using the editor, including control sequences, see the
File Management Feature Overview and Configuration Guide.
Syntax
edit [<filename>]
Mode Privileged Exec
Examples To create and edit a new text file, use the command:
awplus# edit
To edit the existing configuration file myconfig.cfg stored on your device’s
Flash memory, use the command:
awplus# edit myconfig.cfg
Related
Commands
edit (filename)
show file
Parameter Description
<filename> Name of a file in the local Flash filesystem.
To Next Page
Loading...
