Chapter 1: Overview
16
Features
The XS916MX series switches and their features are listed in this section:
XS916MX
Models
Here are model names of the XS916MX Series switches:
AT-XS916MXT
AT-XS916MXS
100/1000/10000
Mbps Twisted
Pair Ports
Here are the basic features of the 100/1000/10000 Mbps twisted pair
ports:
4 or 12 ports per switch
100Base-TX, 1000Base-T, 1000Base-SX, and 10GBASE-T
compliant
IEEE 802.3u Auto-Negotiation compliant
Auto-MDI/MDIX
100 meters (328 feet) maximum operating distance
IEEE 802.3x flow control in full-duplex mode
IEEE 802.3ab 1000Base-T
IEEE 802.3an 10GBase-T
Jumbo frames up to 9KB
RJ-45 connectors
SFP/SFP+ Slots The XS916MX series switch has two SFP/SFP+ slots: S1 and S2 Stacking
Slots. For more information, see “SFP/SFP+ Slots” on page 22.
S1 and S2
Stacking Ports
The S1 and S2 slots are stacking ports for the VCStack feature. You can
use the slots to build a stack of two switches. For more information, see
the “Stacking Slots” on page 23.
LEDs Here are the port LEDs:
Link/activity LEDs for the twisted pair ports
Link/activity LEDs for SFP/SFP+ slots
Switch ID number LED
eco-friendly button turns off the LEDs to conserve electricity
Installation
Options
Here are the installation options for the switches:
Desk or tabletop
19-inch equipment rack
To Next Page
Loading...
