Chapter 1: Overview
20
100/1000/10000Base-T and Twisted Pair Ports
The XS916MXT series switches have 4 or 12 100/1000/10000Base-T
ports.
Speed The ports can operate at 100 or 1000 Mbps, or 10 Gbps. The speeds may
be set manually using the management software or automatically with
Auto-Negotiation (IEEE 802.3u), the default setting.
Duplex Mode The twisted pair ports operate in full-duplex mode. You cannot change the
duplex mode of a port manually.
Wiring
Configuration
The wiring configuration of a port operating at 100 Mbps can be MDI or
MDI-X. The wiring configurations of a switch port and a network device
connected with straight-through twisted pair cabling have to be opposite,
such that one device is using MDI and the other MDI-X. For instance, a
switch port has to be set to MDI-X if it is connected to a network device set
to MDI.
The switch has the auto-MDI/MDI-X detection feature (IEEE 802.3ab-
compliant) so that the switch automatically negotiates with network
devices to establish their proper settings.
Maximum
Distance
The ports have a maximum operating distance of 100 meters (328 feet).
Port Pinouts See Table 14 on page 74 and Table 15 on page 74 for the port pinouts of
the 100/1000/10000Base-T twisted pair ports.
To Next Page
Loading...
